Advanced Search

column
Review of Analysis Methods and Control Technologies for CLLC Resonant Converters
Kai Sun, Kai Zhang, Huan Chen et al.
2025, 11(2): 1-16. DOI: 10.23919/CJEE.2025.000131
A Review on Junction Temperature and ON-state Voltage Condition Monitoring of Power Semiconductor Devices
Xinming Yu, Jie Kong, Ning Wang et al.
2025, 11(2): 17-37. DOI: 10.23919/CJEE.2025.000144
Home Energy Systems in Europe: Advancements and Future Directions
Rui Xue, Guidong Zhang, Zhong Li
2025, 11(2): 38-62. DOI: 10.23919/CJEE.2025.000137
Advances in Space Vector Modulation Techniques for Multilevel Inverters: A Comprehensive Review
Zifan Lin, Xinan Zhang, Jianguo Zhu et al.
2025, 11(2): 63-77. DOI: 10.23919/CJEE.2025.000146
Overview of Magnetic Coupling Wireless Power Transfer Technology Based on Transmitter-only Control
Yanwei Jiang, Peizhen Xu, Xujian Shu et al.
2025, 11(2): 78-100. DOI: 10.23919/CJEE.2025.000134
Additive Manufacturing for Enhanced Electric Machine Performance
You Zhou, Christopher H. T. Lee
2025, 11(2): 101-113. DOI: 10.23919/CJEE.2025.000143
Review of Sensitivity Analysis Methods for Optimal Design Parameters of Motors
Xiaoyi Luo, Guangwei Liu, Bingchuan Xie et al.
2025, 11(2): 114-135. DOI: 10.23919/CJEE.2025.000130
Embedded Magnetic Encoder-based Rotor-position Detection Technology for Permanent Magnet Synchronous Machines: A Review
Wei Hua, Chao Zhang, Yuchen Wang
2025, 11(2): 136-149. DOI: 10.23919/CJEE.2025.000141
Research Progress on Functionally Graded Materials for Epoxy Insulators in HV GIL/GIS
Hang Yao, Boxue Du, Zehua Wang et al.
2025, 11(2): 150-164. DOI: 10.23919/CJEE.2025.000145
Review of Fault-tolerant Permanent Magnet Synchronous Machine Design and Control for Future Aircraft Application
Bo Wang, Yiwei Wang, Zeliang Zhang et al.
2025, 11(2): 165-187. DOI: 10.23919/CJEE.2025.000139
Influence of Load on Optimal Rotor Skew Angles for Minimum Torque Ripple in Interior and Surface PMSMs
Shensheng Wang, Z. Q. Zhu, Dawei Liang
2025, 11(2): 188-206. DOI: 10.23919/CJEE.2025.000133
Investigation of Cogging Torque Generation Mechanisms in Flux-switching Permanent Magnet Machines Based on General Air-gap Field Modulation Theory
Ming Cheng, Zhiyuan Xu, Yang Jiang et al.
2025, 11(2): 207-215. DOI: 10.23919/CJEE.2025.000135
Principle and Implementation of Temperature-adaptive Active Gate Driver for SiC MOSFET Module
Menghao Li, Hao Li, Jie Ren et al.
2025, 11(2): 216-225. DOI: 10.23919/CJEE.2025.000140
Suppression of Power Interaction Disturbances in Grid-following Inverters Through the Grid-forming Cooperative Strategy
Yongkang Chang, Xing Zhang, Ming Li et al.
2025, 11(2): 226-234. DOI: 10.23919/CJEE.2025.000142
An Automatic Optimization Topology Recommendation Method for DC-DC Converters
Yidi Liang, Hong Li, Mingbo Wei et al.
2025, 11(2): 235-250. DOI: 10.23919/CJEE.2025.000124